Changes on ResellerSMS, once your SMS Content Templates are approved on DLT platform
As per the latest DLT guidelines, to send an SMS, first you have to register your SMS Content Templates on the DLT platform and once your SMS Templates are registered on the DLT Platform, the next step will be to pass the DLT Template Id parameter along with the SMS.
For this, you have to follow the below steps to make the necessary changes in ResellerSMS API or Panel-
A. For Transactional SMS:
1. If you are using OneAPI (Send SMS via Flow) of ResellerSMS (https://my.resellersms.in/api/v5/flow/), check this help doc
2. If you are not using OneAPI and using the Send SMS API of ResellerSMS, you will have to use any one of the below two options to pass the DLT Template Id parameter in the ResellerSMS API:
a). Use Send SMS API: Check this -
If you are not using OneAPI or SendOTP V5 API, and you look forward to pass the DLT approved Template Id parameter, you have to pass it along with all other parameters as you are passing currently.
Additional Parameter (not required in OneAPI or SendOTP V5 API)
|
Parameter Name
|
How to find its value?
|
|
DLT_TE_ID
|
DLT Template Id can be found
from your DLT platform
|
Sample Encoded API URLs:
http://my.resellersms.in/api/sendhttp.php?authkey=YourAuthKey&mobiles=919999999990,919999999999&message=message&sender=ABCDEF&route=4&country=91&DLT_TE_ID=value
Description:: You can pass this Numeric Id once the DLT platform approves your Template and allot you a DLT Template Id. Currently, this parameter is optional, but as per DLT, it will be LIVE by 01 April 2021.
B. For SendOTP:
1. If you are using latest SendOTP V5 API (https://my.resellersms.in/api/v5/otp), check this help doc
2. If you are not using latest SendOTP V5 API, you will have to use any one of the below two options to pass the DLT Template Id parameter in the ResellerSMS API:
a). Use old SendOTP API: Check this -
If you are not using OneAPI or SendOTP V5 API, and you look forward to pass the DLT approved Template Id parameter, you have to pass it along with all other parameters as you are passing currently.
Additional Parameter (not required in OneAPI or SendOTP V5 API)
|
Parameter Name
|
How to find its value?
|
|
DLT_TE_ID
|
DLT Template Id can be found
from your DLT platform
|
Sample Encoded API URLs:
http://my.resellersms.in/api/otp.php?authkey=YourAuthKey&mobiles=919999999990,919999999999&message=message&sender=ABCDEF&route=4&country=91&DLT_TE_ID=value
Description:: You can pass this Numeric Id once the DLT platform approves your Template and allot you a DLT Template Id. Currently, this parameter is optional, but as per DLT, it will be LIVE by 01 April 2021.
Make Sure - DLT_TE_ID, Header and Content must be correct as per your DLT portal.
Error 211 - No DLT Template ID or Invalid Template ID.
Error 203 - PE ID missing or Header/Sender ID not approved.
